Complete Tarozzi rearset kit comprising of alloy levers, black footpeg hangers, folding knurled alloy footpegs, fitting instructions, necessary linkages and fittings. Retains standard silencer bracket position

Spare parts and kits for other models available, please enquire for details. To fit these to the NT version of the 1000 SP you will need to either fit upswept silencers and Le Mans type H pipe or fabricate suitable silencer brackets

 Sorry, this part is no longer available.

Complete Tarozzi rearset kit comprising of alloy levers, black footpeg hangers, folding knurled alloy footpegs, fitting instructions, necessary linkages and fittings. Retains standard silencer bracket position

Spare parts and kits for other models available, please enquire for details

 Sorry, this part is no longer available.

Standard size exhaust downpipe set with balance pipe finished in black

Match these header pipes with Lafranconi silencers EXA14998 for a full Le Mans 1 or 2 exhaust system.

The black finish on these is very basic so you may wish to get them recoated before use.

 This part is available by special order, request a quote

14120751-z 14120751 GU14120751 14 12 07 51
 1412 0751 1412.0751 14.12.07.51

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

 This part is available by special order, request a quote

Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in polished stainless and made in Mandello these downpipes have been developed specifically for the Le Mans and are an excellent choice for bikes that will be ridden. Separate exhaust collets not required with these downpipes.

Hand made to order in Italy
Note that there is no crosspipe joining these downpipes as they are designed to fit with EXA50010 on Le Mans 1 and 2 models, polished and satin finish downpipes with crosspipe are available by special order

 This part is available by special order, request a quote

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

 2 in stock

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.

We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube

38mm rise

 Sorry, this part is no longer available.

Pair of chrome reverse cone mega type silencers supplied with shims to allow fitment to a variety of models. Adjustable mounting bracket and clamp included.

You may need to modify brackets or fabricate your own depending upon which model you have

 This part is available by special order, request a quote